Photo by Luis Rock
Stock Exchange
http://www.sxc.hu/browse.phtml
"There are no usage restrictions for this photo"

justMessing w/ the Art History Brush again :D

horrible results, big fun :lol: :dizzy:

That's what it is all about JC, havin' fun!

I'm stuck on Sepia's today.

PaintShopPro 8.1

Apply a sepia tone. Dupe this layer.
L2 - Artistic Brushtrokes/Watercolour
Mode - Hard Light. Reduce Opacity to suit image.
Merge Visible Layers and Dupe this layer.
L2 - Apply WC again - Mode Normal - 50% or to
suit your image.

Merge All Layers

justMessing w/ the Art History Brush again... horrible results, big funYou're doing well then - for me I got just the horrible results!

Thought this cried out for a cartoon action, my preference in these cases is to leave the black outlines only on the main subject.

Rô

:thumbsup: :thumbsup: Fantastic Byro.

Fun image to work with, and great edits.

Duplicated layer and multiplied to enrich color
Virtual Painter 4
Blended light blue to tone down
Selective dodge and burn
Added texture and lightly unsharpened
Edged

.

I do like that Sidis, well done! :nod:

Excellent Rô. Care to tell what "cartoon" action?
Neve, Sidis, great results :thumbsup:
J.C. today i had as much fun as u, i'm sure of it :D
Art History brush coupled with ps7 wc filter.

J.C. today i had as much fun as u, i'm sure of it :D
Art History brush coupled with ps7 wc filter.I'd given up on art history, seeing the work of you guys (and girls), I'll have to reconsider.
Tutorials?

Excellent Rô. Care to tell what "cartoon" action?Based on PStewart's inicial ideas I did two actions to post in the new Resources section - should be there tomorrow (note to me: remember to post link)

Rô

I'd given up on art history, seeing the work of you guys (and girls), I'll have to reconsider.
Tutorials?
my only advice is to use enough layers for separate parts of the image :D and fingers on ctrl-z also help :lmao:
no, kidding, i'd be also interested in jaykita's tut, i've been justMessing so far ;)


@sidis - turned out just great :thumbsup:

I'd given up on art history, seeing the work of you guys (and girls), I'll have to reconsider.
Tutorials?
Rô
Ok, here's a tutorial for you. Rô, please tell me what you think.

First of all, for my art history brush, I chose a brush from David Nagel's hair and fur series, downsized to about 4.
I used these settings for my art history brush:
Brush size 1/ mode "darken"/ opacity 100/ style "tight short"/ area 1px/ tolerance 1%.
Start with Original layer 1 - flatten image. In the history palette, create new snapshot, and set source for the history brush.
Go back to the layer's palette, create a new blank layer 2, fill with white 100% opacity. Blend normal.
Duplicate the original layer 1 and pull on top of stack. Reduce its opacity to 50%. This is our template. Layer 3.
Select layer 2, (the white fill layer), It will be highlighted. It is on this layer that our art history brush will create its image.
Go over entire layer once with art history brush using the settings given above. The fun is that you can see your paint strokes, so you have quite a bit of control over your image.
Go over color areas one more time if that's what you want to do.
Switch off layer visibility ( the eye) on layer 3 from time to time to view your creation.
When done, go to layer 3, increase opacity to 100%, and change to overlay blend mode.
Go to Select all - copy merged, and paste as a new layer 4.
Apply filter - artistic - watercolor settings 14,0,1. You can experiment with these settings.
And...you're done. Have fun!

I'm going to be completely contrary here; so bear with me while I try to be articulate (not an easy task for me sometimes ;) ).

Jaykita, you get amazing effects with your art work. I totally and thoroughly am in awe with the artistic things you do. If I had as much talent in my whole body that you have in your little finger, I would count myself happy.

But, I disagree with your Art History thing. It is much easier to get great results without having to toggle back and forth between layers to see your progress. "Switch off layer visibility ( the eye) on layer 3 from time to time to view your creation." Why create a layer three unless you want a safe backup layer? Isn't it much easier to 1. Open the image, 2. Create a background copy, 3. Create a snapshot, 4. Fill the background copy with white (or whatever color you want), 5. Begin painting? That way you never have to toggle between layers to see your progress. You have all the same creative options open and can still add the merged layers, textures, etc. to the final image after painting as desired.

Correct me if wrong. Advice and suggestions are always welcome.

Janet

Thanks, Janet, I surely do struggle with the history brush. When I have lots of layers, I can never get it to work.

kiska

Do i have to reply? :cold:
If you dont have a layer 3, opacity low, then you have a blank white wall in front of you, with a brush that decides all. Like a runaway horse. You go where it takes you.
Maybe the brush is the star, but surely, you would like to be the Director/Producer?
That's all that layer 3 helps you do.
So, I dont quite understand your "Why create a layer three unless you want a safe backup layer". You can delete layer 3 anytime you want. I retained layer 3,overlay blend, it just looked good to me to keep it, thats all.

well, i typically create (white) fill layer above the background and set its opacity to 50% or so, and draw in empty layers above this one... that way i can use original as a guide, while clearly seeing what i drew so far

hope it doesn't sound too stupid :blush:

I suppose that like everything else in Photoshop there are several ways of doing the same thing. To each his/her own. Whatever floats your boat and all those other trite sayings. :)

Runaway horse, huh? Hmmm, I've never had that happen. Whoa except in real life. And it ain't no piknik neither.

Janet

Wow! I asked for one tutorial and got three!!
Great stuff guys and gals, going to be difficult to wait till tomorrow to try this stuff.

jaykita
- is there a link to the brushes you mentioned?
- Are these 'special brushes' for art history or just the normal ones?
- Do I just shove new brushes into a folder some place?
Rô

jaykita
- is there a link to the brushes you mentioned?
- Do I just shove new brushes into a folder some place?
http://www.creativemac.com/articles/listarticle.jsp?type=downloads - those "Brushes for Adobe Photoshop, Series xx", xx is 1-25 currently, most probably there'll be more...

all brushes work w/ AHB, but some crapply :D

as for the instalation, just copy those .abr files to "[photoshop directory]\Presets\Brushes\", and load them - click that small triangle (see the attachment), choose from that list that pops out, and then choose "append" (this will add those brushes to the end of brushes list)

Wow! I asked for one tutorial and got three!!
Great stuff guys and gals, going to be difficult to wait till tomorrow to try this stuff.

jaykita
- is there a link to the brushes you mentioned?
- Are these 'special brushes' for art history or just the normal ones?
- Do I just shove new brushes into a folder some place?
Rô
I used the Nagel Series 12-14 brush, 85 downsized to 7, for my art history brush. You have to resize them, they're huge. Here is the link. (http://www.digitalmediadesigner.com/2003/08_aug/features/download43030828.htm)
Re download and installation, you'll find an explanation at this website.
Most all brushes can be used for art history, i think.

Nice subject photo to work with, and am enjoying the renditions and the art history brush discussions!

This was an accident that I liked -- I had read a tutorial about enhancing images with weak skies with use of the Distort->Diffuse Glow filter on a copy layer (then set blend mode to Difference, move to layer copy below - add layer mask, Apply Image, set blend mode to Linear Burn and trash the top layer that you ran the Diffuse Glow on), and I ran that to see what would happen on an image without skies, AND I was playing with the Torn Edges on a paper layer, and then I end up looking at an aged looking version of an old car -- decided to run Selective Color to reduce some black, cyan, etc., added an overlay layer to paint with black to bring back a bit of detail, and then Postered Edges to bring back some of the shape.

I put the car in a new bg. H/S, curves, etc. Ran spatter on bg. Grain and spatter on car. Apply image. Masks all over the place.

Looks like it's home! Nice job, Kiska.

Thanks, cj. But the car still doesn't look 'right' to me. Wrong size, bad drop shadow, WHAAAAAAT?

WOW really, really nice Kiska. Now finish it and add some splotchy shadows to the top of the car like the shadows on the ground. Then your "it doesn't look right to me" will be PERFECT!!!

I'm so impressed. :bow: :bow:

Janet

AHA! Sooie. I took a walk and thought the same thing. No shadows on the top of the car. Thanks

I'm still not good with shadows -- I was thinking that the top of the car might have sun shining on it thru an opening, but was wondering if the shadows near the front tire were too strong? As I said, I'm not too good with shadows... :)

Just some awesome variations everyone! Here I tried to tie Art History with Impressionist.
Nagel Series 12-14 Size 12 65% Opac Tight Short
Unsharp Mask 145/7/0
Impressionist: djrOil24/ Image / 88/95/104
Unsharp Mask 145/7/0

Cheers
Dave

That is marvellous Duv! :bigthmb:

Very interesting, Dave! Your creation is bold, exciting and full of movement.

Line art version in luminosity mode overlaid on to a picture of slate. masked out unwanted areas.

Christine

Very, very nice Xaran. Luminosity mode huh? Look like I'm going to have to spend some time exploring its properties.

Janet

Christine - cool version!

Moon glow on a foggy night, or are there car-ghosts?

I do like that Sidis! Your work is lovely to see.