Announcement

Collapse
No announcement yet.

Advice

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Wolfman
    replied
    Re: Advice

    FS helps when using the low frequency layer to even out skin tones.

    Leave a comment:


  • thedonjon
    replied
    Re: Advice

    Thanks. I've been wanting to give frequency separation a try. I will watch a tutorial on it.

    Leave a comment:


  • Wolfman
    replied
    Re: Advice

    Originally posted by thedonjon View Post
    Thanks Wolfman. This sort of shows the same problem I had with the guy's face, it looks blotchy. This is the most difficult image I've ever worked on!

    Is this better? I wasn't that difficult. I used frequency separation to smooth out his skin tone a little.
    Attached Files

    Leave a comment:


  • thedonjon
    replied
    Re: Advice

    Thanks. I actually am looking to get tips so I can do it myself. :-)

    Leave a comment:


  • edbayani
    replied
    Re: Advice

    https://www.dropbox.com/home?preview...+fam1+copy.jpg
    Here is an edit
    Attached Files

    Leave a comment:


  • thedonjon
    replied
    Re: Advice

    Thanks Wolfman. This sort of shows the same problem I had with the guy's face, it looks blotchy. This is the most difficult image I've ever worked on!

    Leave a comment:


  • Wolfman
    replied
    Re: Advice

    I worked on your image......it's probably 95% done.
    Attached Files

    Leave a comment:


  • thedonjon
    replied
    Re: Advice

    Thanks Jeff and Wolly. Jeff, I actually took a photo of the print because I wasn't happy with the scanned image. Unfortunately, the photo was found in this damaged condition with all sorts of marks, smears and stains on it.
    Wolly, I'm going to try your advice on flipping the sides over.
    Thanks to you both again!

    Leave a comment:


  • LazDodge
    replied
    Re: Advice

    Hi Don:

    A beautiful family! Worth going into the image to repair.

    There's a lot of dirt and some smudges on the image. First thing I'd suggest is to clean your scanner glass. Just use a soft lens cleaner cloth and if needed, just spray a bit of glass cleaner directly onto the cloth, not onto the glass.

    You can use same cloth to gently dust off the original photo - don't smear across and don't press down hard otherwise you'll make things worse.

    Rescan as high a resolution as possible - turn off any scan presettings so scanner doesn't alter the image.

    I don't know what software you're using - but I just used the spot healing tool and bit of cloning in Photoshop on the attached revised image. Work in small areas at a time - takes patience so don't get frustrated. Something doesn't look right, just go back in the history and try again.

    I've attached cropped images of both the original and the revised. Needs more work but it's a start and shows how it's possible to repair.

    I hope this helps - I'm new to restoration myself!

    - Jeff
    Attached Files

    Leave a comment:


  • Wolly55
    replied
    Re: Advice

    Hi thedonjon, you will always notice imperfections on photos when you have scanned them or taken photos of them. You may need to take multiple scans/photos to get one good one. Also when i scan in an image i make sure all adjustments in the scanning software are switched off allowing me to have a natural scan. Sometimes if you have adjustments on this can increase some of the problems you see in the photo. As for the sons face, i would use (as you look at the screen) his left cheek and flip to use on the right side and then the right side of his forehead and flip to the left side, have these on separate layers and then adjust each layer to closely match the tones, then do a clean up. Hope this makes sense.

    Leave a comment:


  • thedonjon
    started a topic Advice

    Advice

    This photo has huge sentimental value to my friend who lost her son. I searched trying to find help on how to make skin look natural when you have to take out the marks and discoloration. I ended up with the face of the son looking "plastic".
    Also, does anyone know why the original photo (color on glossy paper) looks pretty sharp, but when I scan it or take a photo of it (I've tried both methods), lots of imperfections show up, including artifacts/grain?
    Would very much appreciate some advice/guidance.
    Thanks!
    Donna
    I uploaded the image but don't see it here? Will post to see if it appears.
    Attached Files

Related Topics

Collapse

  • earthcharm
    Advice on mildew damage et al
    by earthcharm
    I'm getting ready to restore this old 1950's photo that is covered in mildew (or mold?). I've tried a few things, like desaturating the photo and using the pattern stamp to clean up the intense noise, but I'm wondering if I'm headed in the right direction. It's a big job and I could use advice on...
    03-04-2009, 01:45 PM
  • sjcampbel
    The "Horror" restoration
    by sjcampbel
    Dear all,

    I have been lurking once again after a stint of being incredibly busy at work. I have been doing some playing on photoshop 7 and the Mother-in-Law (aka "The Dragon") gave me the attached photo which is her sister's children.

    Well after threats from my...
    10-22-2003, 06:22 PM
  • amclau09
    Advice on double exposed photo
    by amclau09
    I have this old picture I have come across. It is double exposed and was probably taken somewhere in the 1920's or 30's possibly. I attached a copy of the picture though it is just a picture I took of it with a cell phone. I have not been able to get a proper scan because I am afraid of possibly damaging...
    01-24-2015, 02:34 PM
  • Mesme
    Advice please
    by Mesme
    Hello, I'm new here, and an advanced amateur CS5 user. You can see the photo I'm trying to restore has pretty severe damage.

    I'm not looking for someone to do this for me, however, advice on how to do it would be great!

    Several points of concern for me are below.
    ...
    12-23-2012, 05:53 PM
  • Dlbp422
    Scanning damaged photo
    by Dlbp422
    I have recently come across a photo that is very special to me, I thought I lost it in our house fire five years ago. It has smoke and soot damage and I would like to scan it before I take it anywhere to have it proffesionally cleaned or restored in case something happens to it there. I read somewhere...
    06-01-2008, 02:45 AM
Working...
X