Announcement

Collapse
No announcement yet.

How would you restore this photo.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Leah
    replied
    You could also try using a utility like Neat Image (various versions, including a free one, can be found here) to reduce the graininess of the image.

    I've attached a version where I ran the image through Neat Image, used Photoshop's Healing Brush and Cloning stamp to remove some of the more obvious damage (as this was just a quick attempt, I haven't tried to remove it all), then sharpened by duplicationg the layer, running High Pass with a setting of 4, and setting the blending mode on the High Pass layer to Hard Light (as suggested by Tom above).

    There are various other sharpening tricks you can try, but overall Tom is right that you want to aim for "acceptably sharp" rather than "pin sharp".
    Attached Files

    Leave a comment:


  • thomasgeorge
    replied
    Neat picture!! Just a few thoughts, and these are simply my own observations so take them with the proverbial grain of salt...

    (1) Over all the photo is in good shape. It appears to be a typical home grown snap shot so trying to turn it into a Studio posed quality one probably isnt going to work BUT that does not in anyway detract from its charm and simple elegance.
    (2) The major areas to approach are tonal balance and spot removal. Accomplish the first objective with the use of Levels or Curves...think contrast...that in itself will help put some "focus" into the photo. Remove spots by either cloning or masking off the areas and applying a median filter at a setting of 1 then deselecting.
    (3) Go Here:http://www.aim-dtp.net/aim/techniques/index.htm
    and get the free filter "Rank Replace 8 band"...it is very useful for removing spots, mold spots on slides and so on
    (4) Finally, dont get too enthuastic with sharpening. If you are using Photoshop try this: Rt. click on the background layer in your layers palette and copy the background layer. Then apply a high pass filter at a setting of 3.5 or so to the copy ( it lives under "Filters>Other> Highpass)...everything will turn grey...dont worry....now look at the top Lt. edge of the layers box and you will see the "Blending mode" dropdown menu. It will be set by default to normal. Press the arrow next to it and select either Overlay, Softlight or Hardlight from the menu...when you see which gives you the desired degree of sharpness, flatten the image. DONT try to get this photo crystal clear...it wont work. Just adjust the Tone, Remove the spots, perhaps crop and use the mildest sharpening you can....good luck...Tom

    Leave a comment:


  • rjcollins
    replied
    Whoops, forgot the attachment.

    www.pbase.com/image/11864718.jpg

    Leave a comment:


  • rjcollins
    started a topic How would you restore this photo.

    How would you restore this photo.

    Hi, I have been asked by a friend to restore a photo of her as baby. The photo seems to have a sort of gritty film on it and has lost focus or maybe was not clearly in focus when the phot was taken. I'm quite new and can't seem to find my way clear. Thanks in advance.

Related Topics

Collapse

  • JAYKAT
    This photo is totally challanging...aacckkk
    by JAYKAT
    Once again this photo is my sister and it is so darn cute I have to do something to it to bring from being somewhat blurry...and old looking....HELP!!!! ...
    10-03-2011, 08:17 PM
  • juhanson
    photo emulsion cracks retouching technique
    by juhanson
    Hello,

    It is amazing which photographs you, folks, manage to bring back into life!
    Could you maybe suggest a solution of my problem?!
    My father has a collection of old (ca. 1981) slides, which I would like to scan and preserve for the future generations. The film used...
    11-03-2005, 09:29 AM
  • questdvd
    Any tips on sharpening?
    by questdvd
    i have a very blurred photo (attatched below). most of the restoration work i've done so far (very little) has been removing scratches,blemishes etc.. and basically tidying up old images. So i dont really have any experiance in working with blurred images.

    Any suggestions as to where...
    10-24-2003, 08:53 AM
  • Trimoon
    Sharpening using Photoshop (Something Different)
    by Trimoon
    There are several ways in Photoshop to sharpen an image, the most commonly used is Unsharp-Mask. I will show you two of my favorite ways of sharpening an image; one of them is another way of using the Unsharp-Mask and the other using the High-Pass filter.

    First off, you copy your first...
    09-10-2002, 02:44 PM
  • Colan
    Can I remove the dots
    by Colan
    The photo below is one of three schoolchildren taken at the same time and all have the same problem. They have lost their colour and have various other damage. The one attached is colour corrected which still could be improved.

    The main problem with them all is the green dots covering...
    12-27-2006, 05:50 PM
Working...
X