Announcement

Collapse
No announcement yet.

I can never get this one right.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • justintu
    replied
    Wow, that is quite an improvement. Much better than I have been able to do so far.

    Dan, thank you very much for the short tutorial and the effort you put into the picture.

    I appreciate the reply Roger I will continue to work on it.

    Justin

    Leave a comment:


  • Dan B
    replied
    my quick fix

    This is not a whole lot better but it's quick and dirty.

    First I used the (image, adjustments) channel mixer and changed it to monochrome (grey) RGB set to 25,50,25 and a constant of +4
    This gets rid of the yellow stains.

    Then I simply used the clone tool and went over the cracks, rips and spots. This took about 10 minutes.

    After that you just adjust the brightness, sharpen and then despeckle.

    You can make it look much better if you spend more time cloning but this was the quick and dirty method.

    http://www.webdeals.net/test/z.jpg

    Leave a comment:


  • roger_ele
    replied
    Hi justintu,

    Welcome to RetouchPro

    You are starting off with a difficult photo, there are a lot of different things you can do and many different ways of doing them. IMO, the first thing to do is lighten the image to normal. Might as well get used to adjustment layers from the get-go, they are that valuable. Go to the layers widow and drag the background down to the new layer icon (second from the right along the bottom of the layers window). This will duplicate the background layer onto a new layer. click on the new layer you just made to make sure it is the active layer. At the top of the layers window is a drop down list of different blending modes, change it from normal to screen. This will lighten the photo, if you want it lighter drag the layer you just made to the new layer icon, if that is too light, lower the opacity of the new layer. I attached my lighter version so you can see it.

    Most of the next steps are probably cloning, maybe practice some and then post to this thread, we will all help you out.

    Enjoy, Roger
    Attached Files

    Leave a comment:


  • justintu
    replied
    Here is the picture:

    This is the original:
    http://www.pbase.com/image/18076384/original
    Attached Files
    Last edited by justintu; 06-21-2003, 12:17 AM.

    Leave a comment:


  • justintu
    started a topic I can never get this one right.

    I can never get this one right.

    Hello Everyone!

    I have been reading the Challenges section for a couple of months now to get some tips. I have finally decided to register in hopes of getting some good advice and learn a little. (well a lot actually )
    I am pretty new to Photoshop and have not been able to do this picture any justice.

    Can anyone offer me any suggestions?

    Thank you all very much in advance.

Related Topics

Collapse

  • Rita
    New here, how do I?
    by Rita
    Hello all! I am new here and am working on restoring some family photos. Here is a photo of my father and his twin brother. I need help fixing the missing information on the face of my uncle. How do I fix this? As you can see there is some information left over but very faded. I am new at PhotoShop,...
    05-19-2006, 02:00 PM
  • tcnjdeluca
    Dustspotting and Adjustment Layers
    by tcnjdeluca
    I am restoring a photograph in Photoshop 6.0. The original had lost much of its tonality. I used channel mixer to convert it to grayscall and a couple of layers adjustment levels to restrore the tonality. (and make the picture much darker) I then created a new layer and and clicked "use all layers"...
    10-21-2003, 07:37 AM
  • artmaker
    how to adjust one layer without adjusting ALL of them
    by artmaker
    using CS2, I have an image of a wood grain sign. The wood grain is in multiple layers and under each is an outline I brushed in.
    Now... I want to lighten the wood a bit without changing the color of the outline. I tried linking the three wood tone layers together. Then do an adjustment layer....
    07-12-2006, 01:56 PM
  • jleev
    Duplicating Multiple Layers??
    by jleev
    Is it possible to duplicate the sum of multiple layers into one new layer on top (of the underlying/individual layers) with out losing the underlying layers themselves?
    What I am attempting to do is create a new layer of my image with which to sharpen. That way I can adjust the opacity (thus...
    06-24-2003, 09:53 PM
  • bobdut
    Never quite understood layers and how to use them
    by bobdut
    I've used Photoshop for years -now version CS2 and lately Photoshop Elements v.6_Somehow I've never really grasped the basics of Layers. I open the Layers Panel, put in one of the photos I want to work with as a background and then try and add another, then the 1st one disappears. I know it's something...
    03-03-2008, 06:51 AM
Working...
X