No announcement yet.

Eliminating the "Fuzzies" from old photos

  • Filter
  • Time
  • Show
Clear All
new posts

  • dpweber
    First and foremost, thanks for your suggestions! My lack of response is strictly due to lack of time, not interest!

    Although sleep-deprived at the moment, I was intrigued by Roger's suggestion enough it give it a shot before I fell asleep at the keyboard. Interesting at first but once I tried it -


    Was stunned at the difference this made! Since the photo is not square, a true test will require some time in manipulation to perfectly match the images. However, in aligning a small test portion of the woman's dress, I was truly grateful to see the difference this seemingly simple technique made to the quality of the photo.

    At this point I'd have to say this is a mandatory "first step" in restoring photo's of this condition. THANK YOU!

    As a bit of trivia, this is a photo of my daughter's best friend's Grandma's father, possibly taken at the 1904 World's Fair in St. Louis. Its that kind of history which really fascinates me - and continues to motivate this ever-consuming hobby!
    Last edited by dpweber; 08-23-2003, 12:10 AM.

    Leave a comment:

  • roger_ele
    I think the fuzzy's you are talking about are a reflection of what is called silvering on the surface of the photo. You can see it if you hold the photo at an angle to reflect light off of the surface. The light source that scanners use really reflect off of silvering, that reflection then becomes part of the image.

    To get a kind of ok scan;

    -scan it
    -flip it 180 degrees and scan it again
    -drag the second scan image into the first scan image
    -change top layer to difference mode
    -use free transform to flip top layer 180 degrees
    -push, prod and rotate until it goes black (it is now registered with the first scan), hit enter to keep transformation of transform
    -change mode from difference to darken

    The light is only on one side so this will minus out some of the reflection.

    For best results take a picture of the photo with a digital camera, if you are carefull to light the photo so that no silvering shows you will see past the reflection.

    This kind of image I find very difficult since the hazy fuzzy reflection becomes a insidious part of the detail of the image. I may think I have done a good job until I compare it with a digital copy negative, there is no comparrison.


    Leave a comment:

  • L. Koning
    For noise I always use NeatImage (, but it blurs the picture a little (guess this isn't really a pro-technique ). So I added some high pass sharpening and some edge sharpening.

    Here the result, judge for yourself.

    Attached Files

    Leave a comment:

  • Bill M
    You can go far with this image just by messing around with a Selective Color adjustment layer. Create one and then, at the top of the panel under the Colors drop down choose Neutrals. With neutrals selected experiment with its black, magenta, and cyan sliders to reduce the noise relative to the desired image. Do the same for Black. Ignore the colors it creates, you can desaturate that as the next step. That's all I did to get here, except to brighten it a little. You can see that the texture remains, the antique character remains, and all other flaws are easy to fix with clone tools.
    Attached Files

    Leave a comment:

  • ExclamPt
    There are a couple of techniques I've been using recently to overcome blotchiness:

    1. Create another "image," perhaps the same size as the image you're working on. Fill it with 50% grey and add an appropriate level of noise.

    Use the center of this 2nd "image" as the source for the healing tool. Carefully size the tool on the destination image to help blend the blotches, using the grey image with noise as the source "texture".

    This technique, of course, will obliterate the texture on the destination image, but it's handy for an expanse of wall, sky, etc.

    2. Add a layer containing 50% grey above the blotchy layer. Set it to "Overlay" blending mode. Set your color swatches to about 40% and 60% grey. Use a soft brush at about 10% opacity to selectively lighten or darken parts of the image by painting on the 50% grey layer.

    This has the advange of not affecting the original image. It is easy to undo the changes. By keeping your finger on the 'X" key, you can easily toggle between darkening and lightening. When satisfied, merge the grey layer with the image layer. The percentages given, of course, are only guidelines.


    Leave a comment:

  • dpweber
    started a topic Eliminating the "Fuzzies" from old photos

    Eliminating the "Fuzzies" from old photos

    While I've admired and learned a lot from this forum, I've hesitated to ask the "big guns" for help until I really needed it. Obviously, that time has come! I'd appreciate your thoughts on how to get rid of "the fuzzies" in this photo. By this I mean the noise/blotchiness throughout the photo, most noticeable on the dress and pants.

    First basic question, what is a more appropriate term than "the fuzzies"?

    Second, of course is how to minimize them?

    In other photo's I've typically use this basic approach:
    1. Find the channel with the best appearance.
    2. Snaphot, Median, History brush to paint back in desired details.
    3. Painting over areas such as the dress to have a more uniform appearance.

    However, in this case, "the fuzzies" are prevalent throughout and my solution doesn't seem to efficient. In additon, I love the detail - fuzzy as it may be - on the left side of the photo and want to preserve that as much as practical.

    Would appreciate your thoughts.
    Attached Files

Related Topics


  • Colan
    How do I improve image quality?
    by Colan

    I have tried to restore the photo below and attached a b/w and sepia version.

    I would like the photo to be clearer without so much noise if possible. I also seem to be getting it too dark or too bright, which looks terrible. Is this called silvering, which causes this....
    02-15-2007, 06:56 PM
  • Chadwick
    Old wrinklee!!
    by Chadwick
    My old brain has been well addled with trying to restore this old photo. I am trying with PSP but it ends up worse than the original image. Is there anyone that can help me? I would be most grateful.
    02-08-2006, 10:30 AM
  • doosume
    airbrushing + me = mess
    by doosume
    Hi everyone,

    This is my attempt at airbrushing a base color, shadow and highlight on this picture. I'm going after the glam look but it still doesn't look right..! This is really bugging me - How do you airbrush properly?

    I can not do it.

    I used solid color...
    05-03-2004, 09:10 AM
  • cedwar
    Remaining Noise
    by cedwar
    Hello everyone...

    Ive been working on this pic for a while. I think Ive gotten quite a bit of noise cleared up, but Im still not satisfied with it overall. Does anyone have a suggestion on how to continue with this photo. I used Neat Image earlier and dont want to blur it too much...
    11-08-2004, 08:40 PM
  • kcole321
    Newbie -- Need Help Cleaning up Dirt
    by kcole321
    I've attached copies of a photo of my husband's father that I've been trying to restore. I'm new at this; but, as you can see, I've managed a fair job of cleaning up the image itself. However, I'd like to save the matte also. I can't figure out how to clean up the 'dirt' without destroying the detail...
    12-26-2005, 09:03 PM