Announcement

Collapse
No announcement yet.

CanoScan FS2710

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • CanoScan FS2710

    A friend has offered me his little-used Canoscan FS2710 transparency/neg scanner. Does anyone have any knowledge of these scanners, and, if so, what would be the maximum size (top quality) print i could hope to achieve with it from a perfect Kodachrome transparency? Any other advice/thoughts about the scanner would be appreciated. TIA

  • #2
    Max res according to spec is 2720 ppi x 2720 ppi. That should yield reasonablely good 8 by 10 prints.

    See this thread for more discussion. http://www.retouchpro.com/forums/showthread.php?t=6053

    Catia

    Comment


    • #3
      Many thanks.

      Comment

      Related Topics

      Collapse

      • airubin
        Scanner Quality
        by airubin
        Hi All,

        How good a quality scanner do you need for scanning B&W negitives and color prints?

        I'm using a Umax2200, but I believe that it will probably not be good enough. I got a decent result on it with a print, but I was not too concerned about top notch quality....
        03-10-2003, 11:51 AM
      • darylbubba
        Asking for advice on scanner
        by darylbubba
        I am considering buying a used Epson 4990 scanner. It has nothing with it but the scanner. It is said to work very well and is in good operating condition. The price about $100.
        Is this a good deal? Has anyone had experience getting this scanner working under Ubuntu Linux? I will be scanning...
        10-07-2010, 08:35 PM
      • FotoFixer
        Scanner - Diff Res - Diff Quality
        by FotoFixer
        I have found that 300 dpi on my scanner looks bad, so when I need 300, I scan at 600 or 1200 and resize it. 150 or 180 also looks fine. 500 is just as bad as 300. Somewhere between 500 and 600, is where it changes to needing more than one pass. What is going on, here, that lower and higher resolutions...
        07-01-2008, 12:58 AM
      • Toad
        Advice on scanners - what do I need?
        by Toad
        I have been doing digital photography for about 2 years, and Photoshop for a little less time.

        However, I have thousands of decent photographs on standard 35mm that I would like to be able to work with in Photoshop.

        I am guessing that scanning prints of the photos is the...
        04-29-2003, 11:48 AM
      • jjhannon
        Scanner Recommendation
        by jjhannon
        Hello All!

        I recently repaired a friends HP 5370C scanner. When testing it I found out it does a much better job than my Microtech scanner (6000 series) The detail and color accuracy is superior.

        I am looking to update my flat bed scanner. I have a PC system with USB ports....
        06-30-2004, 10:28 AM
      Working...
      X